Product Categories

    BS-TSC-225IA

    The thermal shock test chambers of this series are one of the commonly used devices in various environmental tests. They are suitable for electronic instruments and meters, materials, electrical engineering, vehicles, metals, aviation products, electronic products
    Effective Volume: 150L

    Inner Box Dimensions: 500×600×500 (W×H×D) (mm)

    Outer Box Dimensions: Approximately 1500×1973×1855 (W×H×D) (mm)

    Temperature Range:

    • High-temperature zone: RT ~ 170℃
    • Low-temperature zone: RT ~ -60℃
    • Test zone: -40 ~ 150℃

    Temperature Shock Range:

    • High temperature: 60℃ ~ 150℃
    • Low temperature: -10℃ ~ -40℃
    • Normal temperature: Indoor temperature

    Temperature Shock and Recovery Time:

    • Temperature shock time: 5S
    • Temperature recovery time: 5 minutes
    • Shock process (as shown in the figure)

    The green line represents the heat storage curve of the high-temperature zone, the red line represents the shock curve of the test zone, and the blue line represents the cold storage curve of the low-temperature zone.

    Temperature Fluctuation: ≤±0.5℃

    Temperature Error: ≤±2℃

    Temperature Uniformity: ≤±2.0℃ (Temperature uniformity is the arithmetic mean of the difference between the measured maximum and minimum temperatures in each test)

    Heating Rate of Preheating Zone: ≥3℃/min (non-linear throughout the process)

    Cooling Rate of Precooling Zone: ≥1℃/min (non-linear throughout the process)

    Functional Requirements:


    Equipment Weight: 550KG

    Equipment Power: 380V 32KW

    Note: The above performance indicators are measured under the conditions of ambient temperature +25℃, relative humidity ≤85%RH, and no test samples.

    Related Products

    Consultation

    BaoShi