• Equipment Model: BS-B-8000AD
• Effective Volume: 8000L
• Inner Box Dimensions: 2000×2000×2000 (W×H×D) mm
• Outer Box Dimensions: Approximately 3250×2400×2350 (W×H×D) mm (subject to the final confirmed 3D drawing)
• Temperature Range: -40℃~150℃
• Humidity Range: 20~98% R.H
• Cooling Method: Water-cooled
• Equipment Weight: 2300KG
• Equipment Power: 380V, 32.5KW
• Others:
  • The above performance indicators refer to the data measured under the conditions of no load, no test materials, and ambient temperature of 25±2℃.
  • Noise: 70dB (1 meter away from the box door, at a height of 1.5 meters)

II. Temperature and Humidity Performance Parameters

(I) Temperature and Humidity Change Rate

• Heating Rate: -40℃ ~ 150℃ ≥3℃/min (non-linear throughout the process, no-load acceptance)
• Cooling Rate: 150℃ ~ -40℃ ≥0.7-1℃/min (non-linear throughout the process, no-load acceptance)

(II) Temperature and Humidity Accuracy Related

III. Input, Output and Control Parameters

• Input Mode: RT100×2 (dry bulb and wet bulb)/4~20mA built-in simultaneously;
• Output Mode: 13 points (Temperature×1, Humidity×1, END×1, RUN×1, T1~T4, TROUBLE×1, H1×1, TIME SIGNAL×3);
• Display Accuracy: Temperature: 0.01℃, Humidity: 0.01% RH, Time: 0.01 second;
• System Capacity: 1～120 test programs (which can be divided into 120 program groups), maximum 1～1200 steps (i.e., 1200 action steps), single-step time up to 9999 hours and 59 minutes.

IV. Core Component Configuration

• Control Instrument: Weishuo
• Compressor: Bitzer (Germany)
• Refrigerant (R404): DuPont (USA)
• Air Condenser: Customized by Baoshi
• Evaporator: Customized by Baoshi
• Expansion Valve: DANFOSS (Denmark)
• Capillary Tube: Daikin
• Oil Separator: EMERSON (USA)
• Solenoid Valve: CASTEL (Italy)
• Drying Filter: Danfoss (Denmark)
• Heating Tube: Finned nickel-chromium alloy electric heating tube (with titanium tube protection for the shell)
• Over-temperature Protection: Rainbow (South Korea)
• Switch: Delixi
• Contactor: Schneider
• Cable: Shangshang